Before you install Windows XP using Flasdisk / USB, you have to have his windows xp cd in advance for the move to the flsadisk. Moving XP to Flasdisk Windowsnya not to copy paste but use USB_PREP8 I have provided below. Before moving windows XP it should Flasdisk first formatted using PeToUSB I have prepared.
Please download PeToUSB
Download PeToUSB
After you download the file on the extract file. then follow the steps below:
2x click the file to format the USB PeToUSB (remember Flasdisk already installed)
Click the star button then press Yes
Next insert the Windows XP installation into Flasdisk
2x usb_prep8.cmd click on the folder existing usb_prep8
it will appear like this (the Windows XP CD you've entered)
Press any keyboard key to continue
Press 1 to select the drive where the windows installation files are, (Change XP Setup Source Path, currently)
A window will appear and select which drive containing the Windows XP setup CD you. Click [OK]. For example in F, click on it, ok
Then select the menu number 3) Change USB-Drive Target Letter, currently
Type the drive letter that contains your USB Flash Disk. For example on drive H:
When finished select the menu number 4 Make New TempImage with XP LocalSource and Copy to USB-Drive
Press Y to start the formatting
Press any keyboard key to continue
Press yes to copy temporary files to the usb
press Yes again
Press Yes again
then press any key to end the process
When finished Flasdisk can be used to make reinstall
Before you begin the installation make sure that your boot sequence is set up so that first bootnya from USB Flash Disk.
aja to enter the BIOS menu. Way, turn on the computer / your laptop, press delete or F2 on the keyboard
After that go into the Bios boot settings
Change the first boot (first boot) USB Hard Drive / Flash Drive klo boot using his first Cd is CDROM (see here can reinstall using the CD)
Click Save and Exit, the computer will restart.
If all goes well, when running back to the computer will boot from your USB Flash Drive and the options menu will appear
Select the [TXT Mode Setup Windows XP, Never Unplug the USB Drive Until After Logon].
IMPORTANT: Do not remove the USB Flash Drive to install Windows XP is over all.
Windows XP Setup will begin. Work as if you are using CD
After the setup finished copying files to your hard drive, setup will restart your computer.
IMPORTANT: Select the [GUI Mode Setup Windows XP, Continue Setup + Start XP].
Windows Setup will continue to use the display setup GUI (Graphical User Interface), still copying from USB Flash Drive.
Continue installation as usual.
When it is finished you can remove the USB Flash Drive. USB / Flasdisk you can use to repair your Windows XP in the event of problems or interference with your windows XP.
